3/8" FRL Filter Regulator Lubricator

Buy filter regulator lubricator combo with 3/8 inch port size, PT, G, NPT thread type available, filtering grade 40μm or 5μm, working pressure up to 148 PSI. Factory price combination unit used in pneumatic system to separate water and oil in compressed air.

SKU: CCHN-ACWS-38

30-day Returns

Free Shipping

Delivery date: 6-25 days

Overview

Favorable price air FRL unit is a combination of filter, regulator and lubricator. It can filter the water, oil and other impurities in the compressed air, and keep the air source in a constant state to reduce the damage to valves or actuators of the device.

Features

The structure of FRL unit is delicate and compact, which is convenient for installation and application.
The pressed-in self-locking mechanism can prevent the abnormal movement of the set pressure caused by external interfere.
The pressure loss is low and the efficiency of water separating is high.
The quantity of oil dripping can be directly observed through transparent check dome.

Specification

Model	CCHN-BFC3000
Fluid	Air
Pressure Type (Optional)	Standard (0.9 MPa), Lower Pressure (0.4 MPa)
Drain Type (Optional)	Semi-auto Drain, Manual Drain, Automatic Drain
Port Size	3/8"
Thread Type (Optional)	PT Thread (Scale: MPa, kgf/cm2, PSI) G Thread (Scale: Bar) NPT Thread (Scale: PSI)
Filtering grade (Optional)	40μm or 5μm
Pressure range	Semi-auto and automatic drain: 0.15-0.9 mpa (20-130 PSI) manual drain: 0.05-0.9 mpa (7-130 PSI)
Max.pressure	1.0 MPa (145 PSI)
Proof pressure	1.5 MPa (215 PSI)
Temperature range	-5~70 ℃ (Unfreeze)
Capacity of drain bowl	60 CC
Capacity of oil bowl	90 CC
Recommended lubricant	ISO VG 32 or equivalent
Weight	0.7 kg

Details

	1	Filter & Regulator
	2	Bracket
	3	Gasket
	4	Fixed Kit
	5	Screw
	6	Lubricator

Dimensions (Unit: mm)

Dimensions of 3/8 inch Air Compressor Filter Regulator

Pressure and Flow Diagram

Pressure and Flow Diagram of 3/8 inch Air Compressor Filter Regulator

Tips: Lubricator of FRL unit troubleshooting

No oil drips in the lubricator

Improper use of oil type, use normal turbine oil for disassembly and cleaning wells.
The oil passage is blocked by foreign matter such as dust, disassemble and clean the oil passage.
The oil surface is not pressurized, disassemble and clean the air into the housing part.
Due to poor oil quality and poor fluidity, replace with new oil after disassembly and cleaning.
Because the surrounding temperature is too low, the viscosity of the oil increases, so that the surrounding temperature is increased to the applicable temperature.
The oil volume adjustment screw is defective, remove the well to clean the oil volume adjustment screw.
The air flow direction of the lubricator is reversed, and the installation direction is changed.

The oil in the lubricator cover has condensate mixed in

Excessive accumulation of condensate in the filter housing flows into the lubricator, discharges the condensate and regularly discharges the water in the filter.

The lubricator leaks

The gasket is not well sealed, replace the gasket.
Synthetic resin housing is cracked, replace the housing.
The dripping window is broken, replace the window.

The synthetic resin cover of the lubricator and the oil drip window are damaged

Used in organic solvent gas environment, using metal housing and glass window.
The influence of special additives in compressor lubricants, switch to other types of compressor lubricants.
The air inhaled by the compressor contains substances that are harmful to resin, so replace it with a metal housing.
Clean the housing and the dripping window with organic solvents, and replace the housing (use neutral detergent for cleaning).