12V DC 12.5A 150W Switching Power Supply

12V DC 150W switching power supply convert full range AC power to 12V DC, rated current 12.5A, Cooling by free air convection and with short circuit, overvoltage and overload protection. High price-effective and reliability SMPS has a wide applications such as LED light strips, computers, printers, TV, radio, air compressors, vehicle and so on.

SKU: CCHN-SMPS-150-12

30-day Returns

Free Shipping

Delivery date: 6-25 days

Overview

Features

Universal AC input range selectable by a switch
Protections: short circuit, overvoltage and overload
Cooling by free air convection
LED indicator for power on
100% full load burn-in test
Low cost and high reliability

Specification

Model		CCHN-S-150-12
Output	DC Voltage	12V
	Rated Current	12.5A
	Current Range	0 ~ 12.5A
	Rated Power	150W
	Ripple & Noise (Max.)(Note 2)	180mVp-p
	Voltage Adjust Range	10.6 ~ 13.2V
	Voltage Tolerance (Note 3)	±1.0%
	Line Regulation	±0.3%
	Load Regulation	±0.3%
	Setup, Rise, Holdup Time	100ms, 50ms, 20ms at full load
Input	Voltage Range	88 ~ 132VAC/176V~264VAC (selected by a switch) or 248 ~ 370VDC
	Frequency Range	47~63Hz
	Efficiency (Typ.)	82%
	AC Current (Typ.)	3.2A/115V AC 1.6A/230V AC
	Inrush Current (Typ.)	Cold start: 35A
	Leakage Current	<3.5mA/240V AC
Protection	Overload	105~150% rated output power Protection type: Shut down output voltage, re-power on to recover.
Protection	Overvoltage	13.8V ~ 16.2V Protection type: Shut down output voltage, re-power on to recover.
Environment	Working Temperature	-10 ~ +60℃
	Working Humidity	20~90% RH non-condensing
	Storage Temperature	-20~+85℃
	Storage Humidity	10~95% RH non-condensing
	Temperature Coefficient	±0.03%/℃ (0~50℃)
	Vibration	10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)	Safety Standards	UL1012 UL60950-1, TUV EN60950-1, CCC GB4943 Approved
	Withstand Voltage	I/P-O/P: 3KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC
	Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC/25℃/70% RH
	EMC Emission	Compliance to EN55022 (CISPR22) Class B, EN61000-3-2, -3
	EMC Immunity	Compliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, light industry level, criteria A
Others	MTBF	≥286.7K hrs MIN. MIL-HDBK-217F (25℃)
	Dimension	19911050mm (LWH)
	Weight	0.8kg
Note	1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance includes set up tolerance, line regulation and load regulation. 4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimensions (Unit: mm)

Details

SMPS Power Supply Applications

Power Tools
Electric Saw, Drilling Machine, Ginder, Sand Blast Machine, Puching Machine, Weeding Machine, Air Compressor, etc.
Offices Devices
Computer, Printer, LCD Monitor, Scanning Machine, etc.
Electrics & Household Appliance
TV, VCRS, Radio, Dust Collector, Fan Lamp or LED Strip, Sewing Machine, Microwave Oven, Fridge/Freezr, Coffemarker, etc.
Industrial Equipemnt
Monitoring Equipment, Shipping, Vehicle, Metalhalide Lamp, Solar System, Wind Power Generation, etc.

Tips: How to deal with the blown fuse of switching power supply?

In general conditions, blown power fuse indicates problems in internal circuits. The power supply operates under high voltage and current. Voltage fluctuations or surges of power grid often give rise to instant increase of current, which may result in blown power fuse. Users should check whether there is breakdown, open circuit or damage on rectifier diode, HV filtering electrolytic capacitor, and inversion power switch tube at the input end. If the power fuse is blown with no indication of other problems, users need to check components on the circuit board to check whether they are burned out with leaked electrolyte. If there is no such condition, users should check whether there is breakdown or short circuit by multimeter. Users shall not start up the equipment even after finding out and replacing the damaged part, because HV components with malfunctions may damage the newly-replaced part. When dealing with blown power fuse, users must check all HV components on the circuit board before starting up the equipment.